Ricoh PRIPORT JP1250 - Manual (Page 78)

Service Program Mode
58
3
Changing the Settings of Service Programs
A
After entering the desired SP No., press the
{{{{q q q q}}}} key.
The value or mode set at the factory will be displayed at the end of the second
line on the guidance display.
Note
❒ If you designate the wrong SP No., press the {
Clear Modes/Energy Saver
}
key. Then, re-enter the desired SP No.
B
Enter the desired value or mode with the number keys.
C
Press the {{{{q q q q}}}} key to store the desired value or mode.
Note
❒ If you enter the wrong value or mode, press the {
Clear Modes/Energy Saver
}
key. Then, go back to step
A.
TSLS01JE
TSLS011E
TSLS01JE
SilverV-gb.book Page 58 Monday, May 15, 2000 3:32 PM