Ricoh PRIPORT JP1250 User Manual
Page 55
Combine—Combining 2 Originals onto One Print
35
1
To Choose a Custom
Reproduction Ratio
A Press the {{{{
Center/Edge Erase
}}}}
key twice.
B Press the {{{{ }}}} and {{{{ }}}} key to
select the original size and di-
rection.
C When you reach the desired
size and direction, press the
{{{{q
q
q
q}}}} key.
C
Press the
{{{{
Start
}}}} key.
D
The beeper sounds after the first
original is on the master. Set the
second original face down.
E
Press the
{{{{
Start
}}}} key.
F
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the
{
Image
Position
} keys (see
⇒
P.9 “Shift-
ing the Print Image Position For-
ward or Backward”) or the side
tray fine adjusting dial (see
⇒
P.10 “Shifting the Print Image Po-
sition to the Right or Left”).
TSLS01DE
TSLS01JE
TSLS012E
TSLS012E
SilverV-gb.book Page 35 Monday, May 15, 2000 3:32 PM