Service program mode, Accessing service programs – Ricoh PRIPORT JP1250 User Manual

Page 77

3. Service Program Mode

Accessing Service Programs

The service programs can be set by
following this procedure.

Reference

For the service program menu, see

⇒

P.59 “Service Program Menu”.

Press the

{{{{

Clear Modes/Energy Sav-

}}}} key.

Hold down the

{{{{

Clear/Stop

}}}} key

for at least 3 seconds.

The SP-mode display appears on
the guidance display.

Note

❒ If you press the wrong key, try

pressing the above keys from
the beginning.

With the number keys, enter the
desired service program number
(SP No.).

Reference

For the SP No., see

⇒

P.59

“Service Program Menu”.

When you want to leave the
service program mode

A Press the {{{{

Clear Modes/Energy

Saver

}}}} key.

Reference

If you want to change the set-
tings of a selected service
program, see

⇒

P.58 “Chang-

ing the Settings of Service Pro-
grams”.

TSLS01AE

TSLS011E

SilverV-gb.book Page 57 Monday, May 15, 2000 3:32 PM

This manual is related to the following products: