P.63 “if you can, Not make clear copies, P.63 “if you – Ricoh AFICIO 180 User Manual
Page 79: Cannot make clear copies, 3if you cannot make clear copies
If You Cannot Make Clear Copies
63
3
If You Cannot Make Clear Copies
Problem
Cause
Action
Copies appear dirty.
The image density is too
dark.
Adjust the image density.
Auto Image Density is not
selected.
Select Auto Image Density.
The reverse side of an orig-
inal image is copied.
The image density is too
dark.
Adjust the image density.
Auto Image Density is not
selected.
Select Auto Image Density.
A shadow appears on cop-
ies if you use the pasted
originals.
The image density is too
dark.
Adjust the image density.
Change the direction of the
original.
Put mending tape on the
pasted part.
The same copy area is dirty
whenever making copies.
The exposure glass, platen
cover, or document feeder
belt is dirty.
Clean them.
Copies are too light.
The image density is too
light.
Adjust the image density.
Damp or rough grain pa-
per is used.
Use dry paper without
rough grain.
Toner cartridge is almost
empty.
Pull the toner cartridge in
the copier, and shake it to
side to side about 5-6 times.
Then insert it into the copi-
er, close the side cover, and
make copies again. If it
does not better, replace the
toner cartridge.
Replacing the Toner Car-
tridge”.
Parts of the image are not
copied.
The original is not set cor-
rectly.
Set originals correctly.