Copying, Basic procedure – Ricoh AFICIO 180 User Manual
Page 41
25
2. Copying
Basic Procedure
A
When the machine is set for user
code, enter the user code with the
{{{{
Number
}}}} keys and then press the
{{{{
#
}}}} key.
Reference
B
Make sure that the machine is in
Copy mode.
Note
❒ If not, press the
{
Copy
} key.
C
Make sure that there are no previ-
ous settings remaining.
Note
❒ To clear settings, press the
{
Clear Modes
} key.
D
Set your originals.
Reference
E
Set your desired settings.
F
Enter the number of copies re-
quired with the
{{{{
Number
}}}} keys.
Note
❒ The maximum copy quantity
can be set between 1 and 99 (de-
fault: 99). See “05. Max. Copy
Q'ty” in
❒ To change the number entered,
press the
{
Clear/Stop
} key and
enter the new number.
G
Press the
{{{{
Start
}}}} key.
The machine starts copying.
Important
❒ If the number of delivered cop-
ies exceeds the delivery tray ca-
pacity, paper jam might occur.
Remove copies before the stack
gets higher than the copy deliv-
ery exit.
Note
❒ To stop the machine during the
multi-copy run, press the
{
Clear/
Stop
} key.