P.27 “setting originals, 2setting originals, Setting originals on the exposure glass – Ricoh AFICIO 180 User Manual
Page 43
Setting Originals
27
2
Setting Originals
Limitation
❒ Set the original after correction flu-
id and ink has completely dried.
Not taking this precaution could
mark the exposure glass and cause
marks to be copied.
Note
❒ Basically the originals should be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the direction of the
originals. For details, see explana-
tions of each function.
Reference
Setting Originals on the
Exposure Glass
A
Lift the platen cover or the docu-
ment feeder.
Note
❒ Be sure to open the platen cover
or the document feeder by more
than 30
°
, otherwise the original
size might not be detected cor-
rectly.
B
Set the original face down on the
exposure glass. Slide your origi-
nal up to the blue scale, then into
the left corner of the exposure
glass as shown.
1: Reference mark
2: Scale
C
Lower the platen cover or the doc-
ument feeder.
Originals
Set in the
document
feeder
Set on the
exposure
glass