Ricoh AFICIO 180 - Manual (Page 63)

Program—Storing Your Copy Settings in Memory
47
2
Program—Storing Your Copy Settings in
Memory
You can store frequently used copy
job settings in machine memory, and
recall them for future use.
❖ ❖ ❖ ❖ Storing Your Settings
You can store your settings you
frequently use.
❖ ❖ ❖ ❖ Deleting A Program
You can delete a stored program.
❖ ❖ ❖ ❖ Recalling A Program
You can recall a stored program.
Note
❒ You can store up to ten programs.
❒ Paper settings are stored based on
paper size. So if you place more
than one paper tray of a same size,
the paper tray prioritized with the
user tools will be selected first. See
“12. Pap.Tray Priority” of the Sys-
tem Settings.
❒ Programs are not cleared by turn-
ing the power off or by pressing
the
{
Clear Modes
} or {
Energy Saver
}
key. They are canceled only when
you delete or overwrite them with
another program.
Limitation
❒ You cannot store the number of
copies in a program.
Storing Your Settings
A
Edit the copy settings so that all
functions you want to store in this
program are selected in a pro-
gram.
B
Press the
{{{{
Program
}}}} key.
C
Press the [Store] key.
D
Select the program number you
want to store these settings in
with the
0 0 0 01 1 1 1 keys. Then, press
the [OK] key.
When the settings are successfully
stored, the
m indicator appears.
Note
❒ Program numbers with m al-
ready have settings in them.
❒ If this program number is al-
ready being used, the machine
will ask you if you wish to over-
write it - press the
[Yes] or [No]
key.