P.41 “when copying onto, Standard size copy paper – Ricoh AFICIO 180 User Manual
Page 57
Copying from the Bypass Tray
41
2
E Enter the horizontal size of the
paper with the
{{{{
Number
}}}} keys,
then press the
{{{{
#
}}}} key.
Note
❒ To change the number en-
tered, press the
{
Clear/Stop
}
key and enter the new
number.
4: Horizontal
5: Vertical
F Enter the vertical size of the
paper with the
{{{{
Number
}}}} keys,
then press the
[OK]
key.
Note
❒ To change the number en-
tered, press the
{
Clear/Stop
}
key and enter the new
number.
❒ When you specify the paper
size,
! appears on the dis-
play to indicate bypass tray
copying.
G Press the
[Exit]
key.
When copying onto standard size
copy paper
Important
❒ If you select Standard or Cus-
tom as the Paper Size setting,
these functions will remain in
effect even after Auto Clear or
pressing the
{
Clear Modes
} key.
You can alter this behavior by
changing “12. Reset Bypass
Set”. See
A Make sure the
[Bypass]
is se-
lected.
B Press the {{{{
#
}}}} key.
C Press the
[Pap. Size]
key.