Radio Shack 43-3820 - Manual (Page 31)

Answ
ering
S
yst
em O
perat
io
n
31
message. Each incoming message can be up to
one or four minutes long, depending on how you set
the recording time (see “Setting the Record Time”
on Page 28). The maximum recording capacity is
about 16 minutes (or 59 messages).
The system stops recording and resets to answer
the next call when:
• The caller hangs up.
• The maximum message length is reached.
• The system detects a busy signal or more than
seven seconds of silence.
• You pick up the handset or any phone on the
same phone line.
±ý
4
'%14&+0)
"
#
"/
'/1
A memo is a message you can record for yourself
or others. The system stores memos as incoming
messages (see “Playing Messages”).
Hold down MEMO until the system announces
“Record memo message” and beeps. Speak your
message.
#э# #э# #э# #э#
flashes.
When you finish the memo, press MEMO or PLAY/
STOP .
±ý
4
'%14&+0)
"
#
"%
108'45#6+10
The system lets you record both sides of a
telephone conversation when you are talking with
the handset.
#
To start recording a phone conversation, press
MEMO on the base until the answering system
beeps and
## ## ## ##
appears. As it records the
conversation, the system beeps to indicate the
conversation is being recorded. To stop recording,
press
PLAY/STOP or MEMO . The system stores a
recorded conversation as a message (see “Playing
Messages”).
±
"016'"
±
"
• The maximum length for
recording a memo is ten
minutes.
• The system cannot
record a memo less than
two seconds long.
• When you try to record a
memo and the TAD’s
message memory is full,
appears and the
system announces “No
remaining time”.
#
"+/2146#06"
#
Every state has different
regulations governing the
recording of conversations
over the telephone. Be sure
to check your local, state
and federal laws before
using this product to record
any telephone conversation
in order to determine that
your use is in compliance
with such laws or
guidelines.