Radio Shack 43-3820 - Manual (Page 27)

Answ
ering
S
yst
em O
perat
io
n
27
2. Repeatedly press
7
| on the base to move
forward or |
6
to move backward until the
correct day appears, then press SET/RING . The
system announces and displays the hour.
3. Repeatedly press |
6
or
7
| until the correct
hour appears, then press SET/RING . The
system announces and displays the minutes.
4. Repeatedly press |
6
or
7
| until the correct
minutes appear, then press SET/RING . The
system announces “AM” or “PM,” and
7777
or
FFFF
appears.
5. Press |
6
or
7
| to choose AM or PM, then
press SET/RING . The system beeps and
announces “Time,” then announces the
currently set day and time.
To check the day and time, press MENU once. The
system announces the currently set day and time.
±ý
5
'66+0)
"
6*'
"0
7/$'4
"
1(
"4
+0)5
You can select how long the system waits to
answer a call — 2, 4, or 6 rings, or toll-saver. If you
plan to check messages by long distance, set the
ring time to toll-saver (see “Using the Toll-Saver” on
Page 34).
1. Press MENU three times. The system
announces “Ring time” followed by the current
setting. The current setting —
((((
,
****
,
,,,,
, or
jI jI jI jI
(toll
saver) — displays.
2. Repeatedly press |
6
or
7
| until the desired
number appears.
3. Press SET/RING to store the setting.
The system beeps and announces “Ring Time” and
the currently set ring time.
±
"016'"
±
"
If power fails, the clock
retains the current time.
When the power is
restored, it starts counting
again from the time the
power failed.