Radio Shack 43-3820 - Manual (Page 18)

T
e
lephone O
per
at
ion
18
1. Lift the handset.
2. Hold down MEM until
C[cehoýIjeh[ C[cehoýIjeh[ C[cehoýIjeh[ C[cehoýIjeh[
and a list of
memory location numbers appear.
3. Select a memory location ( 1 – 0 ) by pressing a
number or repeatedly pressing
9
or
8
.
4. Press CH/SEL .
Ijeh[ýDWc[ Ijeh[ýDWc[ Ijeh[ýDWc[ Ijeh[ýDWc[
appears. If you do
not want to enter a name, skip to Step 6.
5. To enter a name, use the number keys.
To enter two letters from the same key in a row,
press #/
7 7 7 7
to move the cursor to the next
position. For example to enter AB, press 2 so
7777
appears. Then press #/
7 7 7 7
. The cursor moves to
the next position. Press 2 twice so
8888
appears.
° ° ° °
To enter a space, press #/
7 7 7 7
twice without
entering any character.
To enter a number, repeatedly press the
corresponding number key until the number
appears.
To enter a special character, use 0 . Each time
you press 0 , the following characters appear in
this order:
∗∗∗∗
зэ#э зэ#э зэ#э зэ#э
&
эвэб эвэб эвэб эвэб
(space)
&&&&
If you make a mistake, use
∗∗∗∗
6 6 6 6
/TONE or
#### 7
to
move the cursor over the error, then enter the
correct character, or press
TRSF/DEL to delete
a character. Hold down TRSF/DEL to delete all
characters.
6. Press CH/SEL .
Ijeh[ýDkcX[hý Ijeh[ýDkcX[hý Ijeh[ýDkcX[hý Ijeh[ýDkcX[hý
appears.
7. Enter the phone number and any tone or pause
entries (see “Using Tone Services on a Pulse
° ° ° °
"*+06"
° ° ° °
"
To select the desired letter,
refer to the letters on the
number keys. Press once
for the first uppercase
letter, twice for the second
letter, and so on. To enter a
lowercase letter, press four
or five times for the first
lowercase letter, five or six
times for the second letter,
and so on.
For example, to enter John :
press 5 once; upper case
@@@@
appears. Then press 6 six
times; lower case
eeee
appears. Press 4 five times;
lower case
^^^^
appears.
Finally, press 6 five times;
lower case
dddd
appears.