Radio Shack 43-3820 - Manual (Page 2)

Im
port
ant
Saf
e
ty
In
st
ruct
ions
2
+/2146#06"5#('6;"
+05647%6+105
When using your telephone equipment, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and injury to persons,
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on
the product.
3. Never install telephone wiring during a lightning
storm.
4. Never install telephone jacks in wet locations
unless the jack is specifically designed for wet
locations.
5. Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
6. Use caution when installing or modifying
telephone lines.
7. Do not affix the AC power supply cord to
building surfaces with metal fittings (if the
product has an AC power cord).
8. Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
9. Do not use this product near water, for
example, near a bathtub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near
a swimming pool.
10. Do not place this product on an unstable cart,
stand, or table. The product may fall, causing
serious damage to the product.
%106'065
Battery Safety Instructions ........ 4
Introduction ............................... 5
Important Caller ID
Information ................................ 5
Read This Before
Installation ............................. 6
Installation ................................. 7
Mounting the Phone .............. 7
On a Desk Top .....................7
On a Wall Plate or Wall ........8
Installing the Charging
Cradle .................................... 8
Connecting, Charging and
Replacing
the Battery Pack .................... 9
Recycling
Ni-Cd Batteries ...................10
Registering the Second
Handset ............................... 10
Setting the Dialing Mode ..... 11
Setting the Handset’s Ringer
Tone/Volume ....................... 12
Turning the Base’s Ringer
On/Off .................................. 12
Setting Auto Talk ................. 13
Turning Caller ID/Call Waiting
On/Off .................................. 13
Storing Your Area Code ...... 13
Telephone Operation ............... 14
Making and Receiving
Calls .................................... 14
Selecting the Channel ......... 15
Setting the Handset
Volume ................................ 15
Using Flash ......................... 15
Using Redial ........................ 16
Muting the Ringer ................ 16
Using Tone Services on a
Pulse Line ........................... 16
Paging ................................. 16
Transferring a Call ............... 17
Using a Headset .................. 17
Memory Dialing ................... 17
Storing a Name and Number
in Memory...........................17
Editing or Deleting a Number
in Memory...........................19
Entering a Pause................20
Reviewing Memory
Numbers.............................20
Dialing a Memory
Number...............................20
Chain-Dialing Service
Numbers ............................21
Testing Stored Emergency
Numbers ............................21
One-Touch Speed Dial ........ 21
Storing/Editing Numbers ....21
(Continued)
The lightning symbol is intended to alert you to
the presence of uninsulated dangerous voltage
within this product’s enclosure that might be of
sufficient magnitude to constitute a risk of
electric shock. Do not open the product’s case.
The exclamation symbol is intended to
inform you that important operating and
maintenance instructions are included in
the literature accompanying this product.
!
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
.
CAUTION
. CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER OR BACK. NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL. RISK OF ELECTRIC SHOCK
DO NOT OPEN
!