beautypg.com

5vqtkpi"c"0cog"cpf"0wodgt"kp" /goqt – Radio Shack 43-3820 User Manual

Page 17

background image

T

e

lephone O

pera

tion

17

6

4#05('44+0)

"

#

"%

#..

You can transfer an outside call from one handset
to the other.

±

Press

TRSF/DEL

during a call. The call is

automatically put on hold, and the transfer tone
sounds.

Pick up the other handset from the base or cradle
and press

TALK/FLASH

. If auto talk is on, just pick

up the handset. If the handset is away from the
base or cradle, press

TALK/FLASH

or any number

key including

*

or #. The transfer tone stops.

7

5+0)

"

#

"*

'#&5'6

You can connect an optional headset with a

3

/

32

-

inch (2.5-mm) plug. Contact RadioShack for a
suitable headset.

To connect the headset, open the rubber cover on
the side of the handset, then insert the headset’s
plug into the jack.

When you finish using the headset, disconnect it
from the handset and close the rubber cover to
protect the jack.

±ý

/

'/14;

"&

+#.+0)

You can store up to 10 phone numbers and names
in each handset’s memory (10 in one handset and
an additional 10 in the other), then dial a stored
number by entering its memory location number.
Each number can be up to 20 digits, and each
name can be up to 14 characters.

5VQTKPI"C"0COG"CPF"0WODGT"KP"

/GOQT[

When you are storing a number in memory, an error
tone sounds and the phone exits the storing
process if you wait more than 30 seconds between
each keypress. If you receive a call during memory
entry, the phone exits the storing process.

±

"016'"

±

"

Transferring a Call

You cannot transfer a call
to the base’s answering
machine.

Only one handset can talk
at one time. You cannot
accomplish a 3-way
conference call, or make a
call while the other
handset is in use.

To cancel the transfer,
press TRSF/DEL or
TALK/FLASH.

If a transferred call is not
answered within five
minutes, the call is
disconnected.

Using a Headset

Connecting a headset
disconnects the handset’s
earpiece and microphone.

8

or

9

on the handset

also controls the
connected headset’s
volume.

If you place the handset
on the base to recharge it
while the headset is
connected, be sure the
handset seats properly.

With a headset
connected, you make or
answer calls as usual
using the keys on the
handset.

You can use an optional
handset holder (available
from RadioShack) to hang
the handset on your belt
for greater convenience.