Ricoh Aficio 8060 - Manual (Page 93)

Messages Displayed When Using the Scanner Function
85
5
Error has oc-
curred in the
scanner driver.
An error has occurred in
the driver. • Check whether the network cable is
connected correctly to the client
computer.
• Check whether the Ethernet board
of the client computer is recognized
correctly by Windows.
• Check whether the client computer
can use the TCP/IP protocol.
Communication er-
ror has occurred
on the network.
A communication error
has occurred on the net-
work. Check whether the client computer can
use the TCP/IP protocol.
Scanner is in use
for other func-
tion. Please
wait.
A function of the machine
other than the scanner
function is being used
such as the copier func-
tion. Wait for a while and reconnect.
Insufficient mem-
ory. Close all
other applica-
tions, then re-
start scanning.
Memory is insufficient. • Close all the unnecessary applica-
tions running on the client compu-
ter.
• Uninstall the TWAIN driver, and
then reinstall it after restarting the
computer.
No User Code is
registered. Con-
sult your system
administrator.
Access is restricted with
user codes. Contact the administrator of the ma-
chine.
Any of Login User
Name, Login Pass-
word or Driver
Encryption Key is
incorrect.
The entered login user
name, password, or driv-
er encryption key was
invalid. • Check the login user name, login
password, and driver encryption
key.
• Permission to use this function has
not been granted. Contact the ad-
ministrator.
Message Cause Solution