Ricoh Aficio 8060 - Manual (Page 18)

When the Machine Does Not Operate As Wanted
10
1
“ Memory is full.
Do you want to
store scanned
file? ” appears.
The scanned originals ex-
ceed the number of
sheets/pages that can be
stored in the hard disk. • Press [Store File] to store pages that
have been scanned. Delete unneces-
sary files with [Delete File].
• Press [No] if you are not storing pag-
es that have been scanned. Delete
unnecessary files with [Delete File].
The main power indica-
tor continues blinking
and does not turn off
when pressed. This occurs in the follow-
ing cases:
• The exposure glass
cover or ADF is open.
• The machine is com-
municating with ex-
ternal equipment.
• The hard disk is ac-
tive.
Close the exposure glass cover or ADF,
and check if the machine is communi-
cating with a computer.
“ Self check-
ing... ” appears.
The machine is perform-
ing image adjustment op-
erations. The machine may perform periodic
maintenance during operations. The
frequency and duration of maintenance
depends on the humidity, temperature,
and printing factors such as number of
prints, paper size, and paper type. Wait
for the machine to get ready.
Original images are
printed on the reverse
side of the paper. You may have loaded the
paper incorrectly. Load paper correctly. Place paper in the
paper tray with the print side down.
Load paper into the bypass tray with
the print side up. See p.93 “Orientation-
Fixed Paper or Two-Sided Paper”.
Misfeeds occur frequently. The tray's side fence may
not be locked.
• Remove the paper. See p.105 “Re-
moving Jammed Paper”.
• Check the side fence is locked. See
p.94 “Changing the Paper Size”.
Misfeeds occur frequently. The tray's end fence may
not be set properly.
• Remove the paper. See p.105 “Re-
moving Jammed Paper”.
• Check the end fence is set properly.
See p.94 “Changing the Paper Size”.
Misfeeds occur frequently. Paper of undetectable
size has been loaded.
• Remove the paper. See p.105 “Re-
moving Jammed Paper”.
• When loading the paper of undetec-
table size, specify the paper size in
“Tray Paper Size”. See "Tray Paper
Size: Tray 2", "Tray Paper Size: Tray
3", General Settings Guide and
“Copy Paper”, About This Machine.
Misfeeds occur frequently. There is a foreign object
on the finisher tray.
• Remove the paper. See p.105 “Re-
moving Jammed Paper”.
• Do not place anything on the finish-
er tray. It may cause a paper jam.
Problem Cause Solution