Ricoh Aficio 8060 - Manual (Page 38)

Troubleshooting When Using the Copy/Document Server Function
30
2
Display During Connect Copy
This section describes about the display during Connect Copy.
If Connect Copy Is Canceled
This section describes about causes and remedies when Connect Copy is can-
celed.
Problem Cause Solution
[Connect Copy] is not dis-
played.
The sub-machine's main
power is off. Turn on the main machine's main power.
[Connect Copy] is not dis-
played.
Functions that cannot be
used with Connect Copy
are selected on the main
machine (such as storing
or copying the first page
of a document in the Doc-
ument Server). Cancel the functions selected on the
main machine.
[Connect Copy] is not dis-
played.
The main machine is in
Interrupt mode. Press the {Interrupt} key on the sub-ma-
chine to cancel Interrupt mode.
[Connect Copy] is not dis-
played.
The [Connect Copy Key Dis-
play]
setting is off.
Select [Display] for the [Connect Copy Key
Display]
setting.
[Connect Copy] is not dis-
played.
The cable connecting the
two machines is damaged. Contact your service representative.
[Connect Copy] is not dis-
played.
The L is lit. Follow the instructions displayed.
[Connect Copy] appears
faded.
Functions that cannot be
used with Connect Copy
have been set. Press the {Clear Modes} key to clear the
settings.
Problem Cause Solution
The machine cancels
Connect Copy. The main machine's main
power is off, or the operation
switch has been pressed. Turn on the sub-machine's main power
or operation switch, and then press
[Connect Copy]
.
The machine cancels
Connect Copy. The sub-machine's main
power is off. A message instructing you to check the
sub-machine appears on the display of
the main machine. Press [Cancel] to clear
Connect Copy. Turn on the sub-ma-
chine's main power, press [Connect Copy]
and then make your settings again.
The machine cancels
Connect Copy. The Weekly Timer setting
is coming into effect on
the main machine. Turn on the main machine's operation
switch , and then press [Connect Copy].
An error message indi-
cates the main machine
has broken down. The L is lit. Copying is not possible. Follow the in-
structions displayed.