Radio Shack 43-3821 User Manual

Page 8

lla

• away from electrical machinery, electrical

appliances, metal walls or filing cabinets,
wireless intercoms, alarms, and room monitors

• away from other cordless phones

You can try different locations to see which provides
the best performance.

Your telephone connects directly to a modular
telephone line jack. If your telephone wiring does
not have a modular jack, you can update the wiring
yourself using jacks and adapters (available at your
local RadioShack store or online at
RadioShack.com), or have the telephone company
update the wiring for you. You must use compatible
modular jacks that are compliant with Part 68 of
FCC Rules. The USOC number of the jack to be
installed is RJ11C (RJ11W for a wall plate).

'5-

1. Plug one end of the supplied long modular cord

into the

TEL LINE

jack on the base’s back.

2. Plug the modular cord’s other end into a

modular telephone line jack.

3. Insert the supplied AC adapter’s barrel plug

into the

DC IN 9V

jack on the back.

4. Route the adapter’s

cord through the strain
relief slot on the base’s
bottom.

5. Plug the adapter into a

standard AC outlet.

6. Lift the base’s antenna

to a vertical position.

"%#76+10"

You must use a
Class 2 power
source that

supplies 9V DC and
delivers at least 350 mA.
Its center tip must be set
to positive and its plug
must fit the phone's DC
IN 9V jack. The supplied
adapter meets these
specifications. Using an
adapter that does not
meet these
specifications could
damage the phone or
the adapter.

•

Always connect the AC
adapter to the phone
before you connect it to
AC power. When you
finish, disconnect the
adapter from AC power
before you disconnect it
from the phone.

DC IN 9V

TEL LINE

43-3821.fm Page 8 Friday, May 10, 2002 10:08 AM