Radio Shack 43-3821 User Manual

Page 24

Answ

ering

yst
em O

perat

store the setting. The system announces
“Security code,” followed by the newly set
code.

To check your code at any time, press

MENU

twice.

The code appears, and the system announces it.

5+0)

6*'

1..

#8'4

If the ring time is set to

(toll-saver) (see “Setting

the Number of Rings” on Page 17), the system
answers after two rings if you have new messages
(ones you have not listened to).

If there are no new messages, the system answers
after four rings, so you can hang up before the
system answers and avoid unnecessary long-
distance charges.

If the message memory is full, the system answers
after about ten rings, regardless of the ring time
setting.

5+0)

'/16'

1//#0&5

While in remote operation, the system stops all
answering functions and displays

BhBh

. Answering

functions resume when it is no longer being
operated remotely, if you have not turned the
system off.

Remote operation stops when someone picks up
the handset or any phone on the same phone line.

1. Dial your phone number and wait for the

system to answer. If the system is not set to
answer calls, it will answer after about ten rings
and sound a series of beeps.

2. When the outgoing message begins (or the

system sounds a series of beeps), press

####

then enter your security code within 2 seconds.

If the code is correct, the system announces
the number of new and old messages, then “To

43-3821.fm Page 24 Friday, May 10, 2002 10:08 AM