Radio Shack 43-3821 - Manual (Page 17)

17
Answe
ring
S
yst
em O
perat
io
n
5
'66+0)
"
6*'
"&
#;
16
+/'
You must set the day and time so the system can
record the correct day and time of each message.
±ý
1. Press MENU once. The system announces
“Time,” then the currently set time, day, and the
day’s number (
''''
for Sunday,
((((
for Monday, and
so on) appear.
2. Repeatedly press
7
| on the base to move
forward or |
6
to move backward until the
correct day appears, then press SET/RING . The
system announces and displays the hour.
3. Repeatedly press |
6
or
7
| until the correct
hour appears, then press SET/RING . The
system announces and displays the minutes.
4. Repeatedly press |
6
or
7
| until the correct
minutes appear, then press SET/RING . The
system announces “AM” or “PM,” and
7777
or
FFFF
appears.
5. Press |
6
or
7
| to choose AM or PM, then
press SET/RING . The system beeps and
announces “Time” then announces the
currently set day and time.
To check the day and time, press MENU once. The
system announces the currently set day and time.
5 '66+0) " 6*' "0 7/$'4 " 1( "4 +0)5
You can select how long the system waits to
answer a call — 2, 4, or 6 rings, or toll-saver. If you
plan to check messages by long distance, set the
ring time to toll-saver (see “Using the Toll-Saver” on
Page 24).
1. Press MENU three times. The system
announces “Ring time” followed by the current
setting. The current setting —
((((
,
****
,
,,,,
, or
jI jI jI jI
(toll
saver) — displays.
±
"016'"
±
"
• Enter each key press
within about 2 minutes.
Otherwise, the system
exits the time setting
process and you must
begin again with Step 1.
• If power fails, the clock
retains the current time.
When the power is
restored, it starts
counting again from the
time the power failed.
43-3821.fm Page 17 Friday, May 10, 2002 10:08 AM