Radio Shack 43-3821 User Manual
Page 13
T
e
lephone O
per
at
ion
13
6'.'2*10'"12'4#6+10
/
#-+0)
"
#0&
"4
'%'+8+0)
"%
#..5
To make a call, lift the handset and press
TALK
. To
answer a call, lift the handset. Or, if the handset is
not in place on the base, press
TALK
or any number
key,
#
, or
*
. TALK/BATT on the handset and
CHARGE/IN USE on the base light.
To end a call, place the handset on the base or
press
END
. TALK/BATT and CHARGE/IN USE turn
off.
5
'.'%6+0)
"
6*'
"%
*#00'.
The phone scans 20 channels (frequency pairs
used between the base and the handset) and
automatically selects a clear channel when you
make or receive a call.
If you hear other conversations or excessive noise
during a call, press
CH
to select a different channel.
TALK/BATT flashes, followed by a brief pause as
your phone searches for a clear channel.
If the handset is too far from the base, the channel
might not change. Move closer to the base and try
again.
#
&,756+0)
"
6*'
"*
#0&5'6
"8
1.7/'
To adjust the volume of the sound you hear through
the handset during a call, repeatedly press
VOL/RING
.
7
5+0)
"(.#5*
FLASH
performs the electronic equivalent of a
switchhook operation for special services, such as
Call Waiting. For example, if you have Call Waiting,
press
FLASH
to answer an incoming call without
disconnecting the current call. Press
FLASH
again
to return to the first call.
43-3821.fm Page 13 Friday, May 10, 2002 10:08 AM