Roland Bass Pedals PK-9 - Manual (Page 14)

Parameter mode
14
r
MIDI Pedalboard PK-9
4. Parameter mode
Parameter mode lets you make various settings for this unit.
Basic operation in Parameter mode
Here’s the basic procedure for making settings in
Parameter mode.
1. Simultaneously press the [CONTROL 1] and
[CONTROL 2] pedals.
The [CONTROL 1] and [CONTROL 2] indicators flash.
The PK-9 is now in Parameter mode. The abbreviation
of the first parameter (or of the last parameter you
selected since switching on the PK-9) flashes.
2. Press the [CONTROL 1] or [CONTROL 2]
pedal to select the desired parameter.
For details on each parameter, refer to “Parameter
settings” on p. 15.
3. Press the Hold pedal to confirm.
The display shows the value.
4. Press the [CONTROL 1] or [CONTROL 2]
pedal to change the value.
5. Press the Hold pedal to confirm the value
and leave Parameter mode.
Saving the settings (Save function)
When the PK-9’s power is turned off, it will return to its
default settings. However, if desired, you can save the
following settings so that they will be remembered even
after the power is off.
1. Simultaneously press the [CONTROL 1] and
[CONTROL 2] pedals.
The [CONTROL 1] and [CONTROL 2] indicators flash.
The PK-9 is now in Parameter mode.
2. Press the [CONTROL 1] or [CONTROL 2]
pedal to select the “SAv” parameter.
3. Press the Hold pedal to confirm.
The display shows “ok” and the PK-9 leaves Parame-
ter mode.
trn
Parameter settings that are saved Page
Transpose 15
Octave 15
Control 1 Assign 15
Control 2 Assign 15
Foot Switch Left Assign 15
Foot Switch Right Assign 16
Retrigger 16
Velocity 16
Touch 16
Portamento Time 16
Octaver Value 16
Pedal Assign 16
Auto Off 16
MIDI Transmit Channel 15
SAv
PK-9_multi.book Page 14 Monday, April 23, 2012 3:03 PM