RadioLAN Campus BridgeLINK User Manual
Page 71

890-007 Rev. A 01/28/99
Page 61
© 1999 RadioLAN, Inc.
Choose
Destination if you want to filter messages that are broadcast from other nodes and intended for receipt
by the MAC Address.
3. In the
Accept/Reject column, you can allow or disallow the passage of the packet through the CPU based upon
the broadcast type (source or destination) in the
Source/Dest. column:
Choose
Accept to allow the passage of packets to/from the MAC Address.
Choose
Reject to disallow the passage of packets to/from the MAC Address.
After adding all desired MAC Addresses, click the
OK button to exit the E
DIT
page.
Modifying MAC Filters
To modify a MAC filter, select the desired MAC Address. Make changes to the address fields and selections in
the
Source/Dest. and Accept/Reject columns.
After making changes, click the
OK button to leave the E
DIT
page.
Deleting MAC Filters
To delete a MAC filter, select the address of the undesired MAC and mask address and type
00.00.00.00.00.00.
After deleting all undesirable MAC Addresses, click the
OK button to exit the E
DIT
page.