Renesas SuperH SH7600 Series - Manual (Page 5)

i
Contents
Section 1 Connecting the Emulator with the User System ................................1
1.1 Components of the Emulator ............................................................................................ 1
1.2 Connecting the E10A Emulator with the User System ..................................................... 4
1.3 Installing the H-UDI Port Connector on the User System ................................................ 5
1.4 Pin Arrangement of the H-UDI Port Connector................................................................ 5
1.5 Recommended Circuit between the H-UDI Port Connector and the MPU ....................... 8
1.5.1
Recommended Circuit (36-Pin Type) .................................................................. 8
1.5.2 Recommended Circuit (14-Pin Type) .................................................................. 10
Section 2 Specifications of the SH7630 E10A Emulator’s Software ................13
2.1 Differences between the SH7630 and the Emulator ......................................................... 13
2.2 Specific Functions for the SH7630 E10A Emulator ......................................................... 16
2.2.1
Emulator Driver Selection ................................................................................... 16
2.2.2 Break Condition Functions .................................................................................. 16
2.2.3 Trace Functions.................................................................................................... 18
2.2.4 Notes on Using the JTAG Clock (TCK) and AUD Clock (AUDCK) ................. 24
2.2.5 Notes on Setting the [Breakpoint] Dialog Box .................................................... 24
2.2.6 Notes on Setting the [Break Condition] Dialog Box and
BREAKCONDITION_SET Command ............................................................... 25
2.2.7 Notes on Setting the UBC_MODE Command..................................................... 26
2.2.8 Performance Measurement Function ................................................................... 26