Raypak B6000 - Manual (Page 3)

B6000 BOILER MANAGEMENT SYSTEM (BMS)
Contents
Equipment Quantity
B6000 System Control 1
B6000 Boiler Monitor, Installed on Boiler(s) As Ordered
Outdoor Temperature Sensor Assy. (064140) 1
Water Temperature Sensor Assy. (064139) 1
Optional Equipment As Ordered
Check packaging for damage or missing components.
IMPORTANT NOTICE:
These instructions are intended for the use by qualified personnel only,
specifically trained and experienced in the installation of this type of equipment and related system
components. Installation and service personnel may be required by some states to be licensed. If your state
is such, be sure your contractor bears the appropriate license. Only qualified persons shall attempt to repair
this equipment. Repair must be according to these instructions.
WARNING:
Improper installation, adjustment, alteration, service or maintenance may damage the
equipment, create a hazard resulting in asphyxiation, explosion, fire, electric shock, personal injury or property
damage and will void the warranty.
CAUTION:
MORE THAN ONE (1) SUPPLY SOURCE. THIS CONTROL HAS THE POTENTIAL TO BE
CONNECTED TO MORE THAN ONE (1) ELECTRICAL SUPPLY SOURCE. TO REDUCE THE RISK OF
ELECTRIC SHOCK, DISCONNECT ALL CONNECTIONS BEFORE SERVICING.
CAUTION:
RISK OF ELECTRIC SHOCK. MORE THAN ONE (1) DISCONNECT SWITCH MAY BE
REQUIRED TO DE-ENERGIZE THE EQUIPMENT BEFORE SERVICING.
Page 3
PLEASE REGISTER
Before proceeding any further, please take a moment to complete the enclosed user registration form and
mail to Raypak, Inc., 2151 Eastman Avenue, Oxnard, CA 93030.