Radio Shack ET-1118 - Manual (Page 23)

23
Caller ID Messages DIALING NUMBERS FROM
A CALLER ID RECORD
To dial a local number stored in a Caller
ID record, recall the record, then press
TALK . If it is a long distance call, press 1
( 1 appears before the displayed num-
ber) before pressing TALK .
Note: If a Caller ID record does not con-
tain a phone number (if it was blocked
by the caller) you cannot dial from that
record.
STORING A CALLER ID
RECORD TO THE
HANDSET’S MEMORY
Follow these steps to store the name
and number from a Caller ID record into
a handset memory location.
Note: To store a record from a Caller ID
record into the base memory, recall the
record, follow steps in “Storing a Num-
ber in the Base’s Memory” on Page 19.
1. Recall the record you want to store,
then press MEM . Select Loca-
tion appears.
2. Choose a memory location by
pressing its number ( 0 – 9 ) or scroll-
ing the list using or , then press
SELECT .
If the selected location is empty, the
phone beeps to confirm that it stored the
number, then the Caller ID record ap-
pears.
Display Description
New:XX
Total:XX
Shows the number
of new Caller ID
records (records you
have not reviewed)
and the total number
of records.
Private
Name
Private
Number
The caller has
blocked the Caller ID
information from
being sent.
Unknown
Name
Unknown
Number
The caller is not
within a Caller ID
service area.
Incomplete
Data
Appears if there was
an error during the
transmission of
Caller ID informa-
tion. Minor electrical
disturbances can
affect Caller ID infor-
mation. Occasional
errors are normal. If
the phone fre-
quently displays
Incomplete Data,
contact your local
telephone company
or RadioShack store
for assistance.
End Appears when you
scroll past the last
Caller ID record.