Radio Shack ET-1118 - Manual (Page 18)

18
Use the supplied memory directory
stickers to record your stored numbers.
Peel the backing from each sticker and
attach them to the phone as shown.
Storing a Number in the
Handset’s Memory
Each number stored in the handset’s
memory can be up to 20 digits, and each
name can be up to 14 characters.
Note: An error tone sounds and the
phone exits the storing process if you
wait more than 20 seconds between
each keypress.
1. Lift the handset.
2. Hold down MEM until Memory
Store and a list of memory loca-
tion numbers (and names, if any)
appear.
3. Choose a memory location (1–0) by
pressing a number or by repeatedly
pressing
or .
4. To store a name, press SELECT .
Store Name appears.
If you do not want to enter a name,
skip to Step 6.
n>
appears as the name ( n is the mem-
ory location number you selected).
To enter a name, use or to
select the characters and or to
move the cursor.
Repeatedly press to see the char-
acters in alphabetical order. (The
display shows uppercase letters
first, then lowercase letters, num-
bers, and special characters.)
Notes:
• Press to see the characters in
reverse order.
• You can hold down or to
scroll rapidly through the charac-
ters.
If you make a mistake, move the
cursor over the error, then enter the
correct character, or press
DELETE
to delete a character. To delete all
the characters, hold down
DELETE
for at least 1 second.
5. Press SELECT . Store Number
appears.
6. Enter the phone number and any
tone or pause entries (see “Using
Tone Services on a Pulse Line” on
Page 16 and “Entering a Pause” on
Page 20).
MEM