Radio Shack ET-1118 - Manual (Page 13)

13
3. Press SELECT to change the Caller
ID/Call Waiting setting. On or Off
appears indicating the selected set-
ting.
4. Press CALL ID or return the handset
to the base to store the new setting.
STORING YOUR AREA
CODE
To quickly dial a number from a Caller
ID record (see “Dialing Numbers from a
Caller ID Record” on Page 23) or to cor-
rectly store a number from a record into
a memory dialing location (see “Storing
a Caller ID Record to the Handset’s
Memory” on Page 23), you must store
your local area code in the ET-1118’s
memory. Then, when you dial from a
Caller ID record, the ET-1118 skips the
area code if it matches the one you
stored.
Follow these steps to store your area
code.
1. Lift the handset then hold down
CALL ID .
2. Press 3 (or twice) to select Area
Code .
3. Press SELECT , then enter your 3-
digit area code. If you make a mis-
take, repeatedly press or to
move the cursor over the incorrect
digit, then enter the correct number.
Note: If an area code is already
stored, it appears on the display. To
delete the area code, press
DELETE
three times. Then enter your area
code.
4. Press SELECT to store the area
code.
5. To clear the display when you finish,
press CALL ID or return the handset
to the base.
DELETE