Radio Shack ET-1118 - Manual (Page 17)

17
To page the base from the handset,
press
INTCM . Paging Base appears,
and the base and handset ring. Press
SPEAKER or INTERCOM on the base to
answer the page. Intercom appears
on the handset’s display.
To page the handset from the base,
press
INTERCOM . The handset and
base ring, and Paging appears on the
handset’s display. Press TALK or INTCM
on the handset to answer the page. In-
tercom appears.
To end an intercom call, press TALK on
the handset, press SPEAKER on the
base, or hang up the handset.
If a call comes in during an intercom
conversation, either the person at the
base or the person at the handset can
answer the call. Press
TALK on the
handset or SPEAKER on the base once
to end the intercom call, then press
TALK or SPEAKER again to answer the
incoming call.
Note: The intercom does not operate if
the party being paged is already on a
call.
Transferring a Call between the
Handset and Base
You can use the ET-1118’s intercom
feature to transfer a call between the
handset and the base.
To transfer a call from the handset to the
base, press
INTCM . The call is put on
hold, and Paging Base and Hold ap-
pear. When the person at the base an-
swers, press
TALK . The call is released
from hold and transferred to the base.
To return to handset use, press
TALK
again.
To transfer a call from the base to the
handset, press
INTERCOM . The call is
put on hold, and Paging and Hold ap-
pear on the handset’s display. When the
person with the handset answers, press
SPEAKER . The call is released from hold
and transferred to the handset. To return
to base use, press
SPEAKER again.
MEMORY DIALING
You can store up to 20 numbers in
memory (10 each in the handset’s and
base’s memory), then dial a stored num-
ber by pressing a memory location num-
ber. You can also store a name with
each number in the handset’s memory.
SPEAKER
INTERCOM