About this handbook, Part 1: using the st4000+ autopilot, Part 2: installing the st4000+ autopilot – Raymarine autopilot + ST4000+ User Manual
Page 10
Preface
ix
About this handbook
Welcome to the handbook for the ST4000+ wheel and tiller
autopilot systems. This handbook contains two main parts:
Part 1: Using the ST4000+ Autopilot
Part 2: Installing the ST4000+ Autopilot
At the end of this handbook we have included product
specifications, a glossary and index, and templates for installing
different parts of the system.
Note: This handbook contains important information about
installing, using and maintaining your new Raymarine product. To
get the best from the product, please read this handbook thoroughly.
Chapter 1: Introduction
Introduces the autopilot, its features and its use.
Chapter 2: Basic Operation
Covers basic autopilot operation: using Auto mode,
interpreting alarms, adjusting autopilot performance and
changing the control unit lighting.
Chapter 3: Advanced Operation
Explains how to use Track and Wind Vane modes, and
display data pages.
Chapter 4: Maintenance & Fault Finding
Provides general maintenance procedures and
information to help you resolve problems you may
encounter with the autopilot
Chapter 5: Installing the ST4000+
Explains how to install your autopilot and its components.
Chapter 6: Setting-up the ST4000+
Covers functional testing and dockside procedures after
installation, and initial sea trials.
Chapter 7: Customizing the ST4000+
Provides details on adjusting the autopilot settings to suit
your boat.