Ringdale Minit 5250E User Manual

Page 31

Text mode
Original mode

Troubleshooting Guide

This section contains solutions to problems that one might encounter when installing
MinIT 5250E.

To connect to the host, you must know the IP Address of your AS/400 and be on the
same network as your AS/400.

CHECKLIST

The light on the MinIT 5250E is green.

You can ping the host.

The host can ping the MinIT 5250E

The MinIT 5250E IP Address is correct.

The MinIT 5250E IP of Destination host is correct.

Your MinIT 5250E Setup – Name of Session is not invalid or a duplicate.

It is varied on at the AS/400 – WRKCFGSTS *DEV (name of session)

The AS/400 Ethernet line is up – WRKLIND

The AS/400 TCP/IP is started – NETSTAT

The AS/400 Telnet Server is started – NETSTAT

The number of virtual devices is sufficient – WRKSYSVAL QAUTOVRT