Ringdale Minit 5250E User Manual

Page 12

Text mode
Original mode

Network Settings

The Unit Network Name must be unique in order for DNS servers to be able to identify this
unit on the network.

Choose Dynamic (DHCP) IP Address if your site uses a DHCP Server to automatically set
the unit’s network address, netmask, etc. NOTE: If you use DHCP the unit will obtain the IP
Address after a Network Restart. To see the new settings in this window, you must power
cycle.

Choose Static (Manual) IP Address if you wish to fill in your own network parameters. If
you do so, fill in the appropriate information under IP Address, Netmask, Gateway and DNS
Server(s).

If you made any changes to this page, we recommend that you hit the

Network Restart button, in order to make the changes take effect now.

Click the Done button to exit this window and configure another.

Click the Cancel button to cancel your changes.

Click the ? Help button for more information.