Specifying paper size using the operation panel, Sliding out the output tray extender, Printer setup – Ricoh AP505 User Manual
Page 46: Bypass tray size 8.5x11, Bypass tray size 8x13, Ready
Paper and Other Media
28
3
Specifying paper size using the
operation panel
Use the following procedure to speci-
fy the paper size from the printer's
operation panel after loading paper
into the bypass tray.
A
Press {
Menu
}.
B
Use {U}{T} to display “PRINT-
ER SETUP”.
PRINTER SETUP
C
Press {
Enter
} until “BYPASS
TRAY SIZE” appears.
BYPASS TRAY SIZE
8.5x11 *
D
Use {U} {T} to select the paper
size you have specified for the pa-
per tray, and then press {
Enter
}.
BYPASS TRAY SIZE
8x13
E
Press {
Menu
}.
The setting becomes effective.
F
Press {
Menu
}.
The normal display screen ap-
pears.
READY
Sliding out the Output Tray
Extender
If you load paper of A4L or 8
1
/
2
"
×
11"L or larger, slide out the output
tray extender.
Important
❒ Do not place the rear end of the
printer near a wall or touch it with
barehands. This area can become
extremely hot.
Note
❒ After printing, return the output
tray extender to its original posi-
tion.
Power
Error
Data In
Menu
On Line
TFWS020E
Cancel
Enter
TFWX440E