RCA VR704HF - Manual (Page 68)

66
Connections
TV With Audio/Video Jacks and
DIGITAL Satellite Receiver
This connection assumes:
• You have an advanced digital satellite receiver and your
TV has audio/video input jacks.
This connection provides:
• Stereo sound playback from VCR, recording from receiver
while watching cable or off-air channel, and recording one
cable or off-air channel while watching another.
To use this connection, you must have:
• (3) coaxial cables and (6) audio/video cables
If the VCR can control your digital satellite
receiver:
• Position it above the VCR as shown. Make sure not to
block any of the VCR’s ventilation holes.
To connect:
1. Connect cables as shown.
2. Return to the First Things First Section, then follow the
steps.
Using this Connection
• Tune your TV to its video input to record (or watch) the
VCR or digital satellite receiver.
• To record from the digital satellite receiver, tune your
VCR to its line input. L1 appears in the display.
• Turn Auto TV/VCR feature to “OFF.”
To play a tape:
1. Insert a tape.
2. If necessary, press the VCR button and then PLAY to
start.
To record one off-air or cable program and
watch another:
1. Begin recording a program using a recording feature.
2. Select a different channel on the TV.
To record a digital satellite receiver program
and watch a cable or off-air channel:
1. Turn on the receiver, tune the VCR to its line input, and
begin recording a program using a recording feature.
2. Select a different channel on the TV.
CABLE
ANT. IN
RF OUT
CH.
VIDEO
AUDIO
OUT IN
R
L
3 4
R
SATELLITE SIGNAL
OR ANTENNA
SATELLITE RECEIVER
VCR
TV
IN FROM ANT
OUT TO TV CH3
CH4
SATELLITE
IN
S-VIDEO
L AUDIO VIDEO
CABLE/
ANTENNA
INPUT 1
VIDEO
R
L/MONO
S-VIDEO
AUDIO
OUTPUT
R
L
INPUT 2
VIDEO R
L/MONO
OR
CABLE BOX
VCR'S
SIGNAL
Position Remote-Controllable
Cable Box
VCR
TRANSMITTER