RCA VR704HF - Manual (Page 37)

35
Recording
3. Enter the PlusCode ® programming number shown in
your local television programming guide.
VCR PLUS+
Enter PlusCode Number
(from TV listing)
12876
Press CLEAR to correct
Press MENU when done
(Screen shown is just an example).
4. Press MENU after entering the number.
How often should this
program record?
1 One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
0 Cancel
5. Indicate how often you want the program to be
recorded.
Program 1 (One time)
Channel 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/16/00 Thu
Tape Speed SLP
Press CLEAR to adjust
Press MENU to save
6. Change the speed with the SPEED button on the
remote or the program end time with the CLEAR
button on the remote (if necessary).
Changing the end time comes in handy when you are
recording a program, such as a sporting event, that may
exceed the scheduled broadcast time.
7. Press MENU to save the program.
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Remember to leave your
cable box on.
PlusCode is a registered trademark of the Gemstar Development Corporation.
The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
Continued on Next Page
VCR Plus+ Recording
Clock must be set correctly.
Insert a tape with the safety tab in
place and enough tape to record the
program.
UNRECOGNIZED NUMBER... PLEASE
RE-ENTER appears when the VCR does
not recognize the PlusCode number.
PROGRAMS OVERLAP appears if you
have entered two programs where
the times overlap.
TIMER appears in the display when
you turn off the VCR and a timer
recording has been set. TAPE flashes
if there is no tape in the VCR.
For a cable box, turn it on and tune it
to the channel you want to record
before the recording is to begin.