RCA VR704HF - Manual (Page 18)

16
Setting Up the VCR
Spring forward; Fall back
In the Spring, Daylight-Savings
begins on the first Sunday in April.
Because the clock automatically
changes from 2 a.m. to 3 a.m.
(forward one hour), remember to
include the extra hour for timer
recordings falling within this time
frame.
In the Autumn, Daylight-Savings
ends on the last Sunday in October.
The VCR clock automatically changes
from 2 a.m. to 1 a.m. (back one hour).
Therefore, it can affect your
recording length.
Setting Daylight Savings
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 3 to display the TIME menu.
TIME
1 Set Time and Date
2 Auto Clock Set:
ON
3 Set Time Zone
4 Set Daylight Savings
Time Data was not found.
0 Exit
3. Press 4 to display the SET DAYLIGHT SAVINGS menu.
SET DAYLIGHT SAVINGS
Does your area observe
Daylight Savings Time
from April to October?
1 Yes, DST is observed
2 No
3>Automatic
Press MENU to continue
4. Select one of the options.
• DST stands for Daylight-Saving Time.
• If you choose Automatic, the VCR sets the clock using
the DST information broadcast in the signal (channel).
Setting Time and Date Manually
If the Auto Clock Set was unsuccessful, set the clock
manually through the TIME menu option. The Auto Clock
Set feature is set to OFF automatically when you set the
clock this way.
1. Press MENU to display the VCR MAIN MENU.