RCA VR704HF - Manual (Page 65)

63
Connections
TV
VCR
ANT. IN
RF OUT
CH.
VIDEO
AUDIO
OUT IN
R
L
3 4
CABLE/
ANTENNA
CABLE, CABLE BOX, OR ANTENNA
INPUT 1
VIDEO
R
L/MONO
S-VIDEO
AUDIO
OUTPUT
R
L
INPUT 2
VIDEO R
L/MONO
TV With Audio/Video Jacks
This connection assumes:
• You are connecting an antenna, cable, or cable box
system.
• Your television has audio/video jacks.
This connection provides:
• Stereo sound playback from VCR.
• Record one channel while watching another (except
when using a cable box for all channels).
To use this connection, you must have:
• (1) coaxial cable for cable/antenna connection; (2) for
cable box
• (3) audio/video cables
If your cable box is remote controllable:
• Position it above the VCR as shown. Make sure not to
block any of the VCR’s ventilation holes.
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
• Tune your TV to its video input channel.
• Use of TV•VCR button is not required.
• Set the Auto TV/VCR feature to “OFF.”
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record one program and watch another:
1. Begin recording a program using one of the
recording features.
2. Select a different channel on the TV.
CABLE BOX
VCR'S
SIGNAL
Position Remote-Controllable
Cable Box
VCR
TRANSMITTER