RCA VR704HF - Manual (Page 39)

37
Recording
4. Press the SPEED button on the remote if you want to
override the preferred Tape Speed setting. The tape
speed indicator appears on the TV screen.
5. Select the channel or line input to be recorded.
6. Set the Reception: STEREO/MONO/SAP feature for the
type of audio you want to record. See Other
Features section.
AUDIO
1 Reception: STEREO
2 Tape Playback: HI-FI
0 Exit
7. Press RECORD to start recording.
8. Press STOP when you are finished.
Recording Audio Only
You can record audio only from another audio source
connected to either the AUDIO IN 1 (R and L/MONO) jacks
on the back of the VCR or the jacks on the front of the
VCR.
1. Press the INPUT button once to record from the back
AUDIO IN jacks. L1 will appear in the VCR’s display
panel.
Press the INPUT button twice to record from the front
AUDIO IN jacks. L2 will appear in the VCR’s display
panel.
2. Press the SPEED button on the remote if you want to
override the preferred Tape Speed setting.
3. Start audio source playing and press RECORD to begin
recording.
4. Press STOP when you are finished.
Playing Back Audio Only
To get stereo sound, connect the AUDIO OUT jacks of the
VCR to the appropriate input on your amplifier or receiver.
Do not use the phono input. Refer to your amplifier or
receiver user’s guide.
VCR
AMPLIFIER/
RECEIVER
ANT. IN
RF OUT
CH.
VIDEO
AUDIO
OUT IN
R
L
3 4
LEFT
RIGHT
PHONO TUNER TAPE AUX
IN OUT
Audio Connection
Recording audio only will erase
anything that was previously
recorded on the tape.