RCA VR704HF - Manual (Page 40)

38
Recording
Using Two VCRs for Copying and
Editing Tapes
Use one VCR as the playback VCR and the other as the
recording VCR.
1. Turn on the TV and VCRs.
2. Tune the TV to the VCR viewing channel (either 3, 4, or
TV’s video input).
3. If you connected your VCR using the IN FROM ANT. and
OUT TO TV jacks, tune recording VCR to channel 3 or
4—the one selected on the back of the playback VCR.
If you have connected your VCR using the audio/video
jacks, press INPUT on the recording VCR’s remote to
select the line input. Select L1 for the jacks on the back
of the VCR or L2 for the jacks on the front.
4. Insert the tape you want to copy into the playback VCR.
Insert a blank tape with safety tab in place into the
recording VCR.
5. Press PLAY on the playback VCR to begin playback.
When you reach the point on the tape or program
where you want to begin copying, press PAUSE. You
may need to adjust the tracking.
6. Press the RECORD button, then press PAUSE, on the
recording VCR.
7. Press the PAUSE buttons on both VCRs at the same time
to begin copying the tape.
8. To edit segments that you do not want to copy:
• Press PAUSE on recording VCR to pause copying.
• Locate the next segment you want to copy on playback
VCR by using FWD, REV, and PLAY, and then press
PAUSE.
• Press PAUSE on both VCRs at the same time to resume
copying.
9. Press STOP on both VCRs when you are finished.
PLAYBACK VCR
CABLE BOX
OR ANTENNA
RECORDING VCR
TO TV TO TV
3 CH. 4
ANT. IN
RF OUT
VIDEO
AUDIO
OUT IN
L
R
ANT. IN
RF OUT
CH.
VIDEO
AUDIO
OUT IN
R
L
3 4
IN
OUT
OR
OR
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
Two VCR Connection
Note that the two VCRs used in the diagram may not look exactly
like the VCRs you are connecting. The important thing is to match
the proper cable connections. Use the OUT jacks of the playback
VCR to connect to IN jacks of the recording VCR. R output jacks
connect to R INPUT jacks, L output to L input, and VIDEO out
connects to VIDEO in.