Playback – RCA ProV800C User Manual

Page 75

Playback

Playback Operation and How to Copy Tapes on the VCR

Viewing What the Camcorder is Seeing (or Recording)

Caution: The unauthorized recording
of copyrighted material may infringe
the rights of others.

1. A. Camcorder connected directly to

TV: Turn on the TV and tune it to
the video input channel.

B. Camcorder connected to VCR that

is already connected to TV: Turn
on VCR and place it in the line,
video, or camera mode. (If your
VCR does not have a line, video, or
camera mode, consult the VCR
owner’s manual.) Operate the TV
as you normally do to see the signal
coming from the VCR.

2. Place the POWER switch in VCR to

turn on the camcorder. The power
indicator will light.

3. Press PLAY/PAUSE.

• During playback, use the playback

features described on pages 69-70.

• If noise bars appear on the screen,

adjust tracking as described on
page 71.

4. To copy what the camcorder is playing,

place a blank cassette in the VCR, and
press the VCR’s RECORD button.

Make sure the memory-stop feature is
turned off (press COUNTER R/M) or the
camcorder will enter play pause when the
counter reaches M 0:00:00.

5. Press STOP when you are finished.

1. A. Camcorder connected directly to

TV: Turn on the TV, and tune it to
the video input channel.

B. Camcorder connected to VCR that

2. Place the POWER switch

in CAMERA.

3. Press the thumb trigger to begin

recording. You can watch what the
camcorder is seeing (or recording) on
the TV screen.

Notes: When the camcorder is used as a
camera, turn the TV’s volume down to
prevent a high-pitched squeal caused by
feedback.

4. Press the thumb trigger on the

camcorder to pause recording.