RCA ProV800C - Manual (Page 14)

12
Powering Your Camcorder
Attach Adapter/Charger
1. Connect one end of the DC cable
to the DC OUT jack on the
adapter/charger.
2. Connect the other end of the DC cable
to the DC in jack on the camcorder as
shown above.
3. Plug the adapter/charger’s plug into
the nearest AC outlet (100-240V,
50/60Hz).
4. If the adapter/charger is properly
connected, its POWER indicator will
light.
Remove Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
2. Remove the DC cable from the
adapter/charger and camcorder.
Using an Optional Plug Adapter
An optional plug adapter may be required
in some countries.
1. Plug the adapter/charger’s plug into
the AC plug adapter.
2. Plug the AC plug adapter into the
AC outlet.
AC Plug
Optional AC
Plug Adapter
AC 100-240V
Caution: Do not use this adapter/
charger for any other purpose other than
charging the 236130, FB1260 or FB120
battery pack or supplying power to the
camcorder.
Using the Adapter/Charger to Power Your Camcorder
The adapter/charger attaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery.
BATT. RELEASE
AUDIO
RF
DC OUT
VIDEO
LE N S C O V E R + –
CAMERA
VCR
POWER
OFF
POWER CHG END REFRESH
JLIP
POWER
Indicator
DC OUT Jack
DC In
Jack
DC Cable
Adapter/Charger
To AC 100-240V, 50/60 Hz