beautypg.com

Powering your camcorder – RCA ProV800C User Manual

Page 17

background image

15

Battery Level Indicator

The battery level indicator appears on the
LCD monitor or in the viewfinder and
shows you the amount of power in the
rechargeable battery.

Powering Your Camcorder

Battery Care and Storage

• Recharging takes approximately 100

minutes depending on the battery’s
condition.

• Refreshing takes approximately five

hours and 30 minutes depending on the
battery’s condition.

• After repeated charging and use,

operation time will gradually decrease.
When operation time becomes too short
to be useful, it is time to replace the
battery.

• If the battery discharging must be

stopped in the middle, remove the
battery from the adapter/charger before
unplugging it from the AC outlet.

• Let a hot battery cool down before

attaching it to the adapter/charger.

• The battery will provide better service

if its power is completely drained
before storing it for long periods of
time (30 days or more).

• The battery should be charged in the

temperature range of 50-95°F (10-35ºC)
to prevent damage.

• Do not operate the battery at

temperatures below 32°F (0°C) or
above 104°F (40°C). The battery may
be damaged if operated at temperatures
above 122°F (50°C). Operation time
will decrease at extremely low
temperatures.

• Store the battery at normal room

temperature.

Battery Level Indicator

on LCD Monitor or in

Viewfinder

• When

appears, the battery is

fully charged.

• As the power is used

and

appear.

• When the battery power is almost gone,

flashes. The camcorder will turn

off automatically after a few seconds.
Place the POWER switch in OFF to
turn off the camcorder before replacing
the battery.

The battery level indicator will not be
recorded on the tape when it appears.