RCA ProV800C - Manual (Page 57)

55
Recording
Self-Timer Indicator in Viewfinder
or on LCD Monitor
8. Press
4 4 or 3 3 to select the amount of
time you want the recording delayed.
• Select 15S to delay the recording
for 15 seconds.
• Select 30S to delay the recording
for 30 seconds.
• Select 1min to delay the recording
for one minute.
• Select 5min to delay the recording
for five minutes.
• Select OFF if you do not want the
camcorder to delay recording.
5min
PAUSE
9. Press
5 5 twice to return to the
recording menu.
10.Press MENU to exit the menu. and
the amount of delayed recording time
appear in the viewfinder or on the
LCD monitor.
11. Press the thumb trigger to start self-
timer recording. The camcorder will
start recording after the amount of time
you have set. It will continue
recording until you press the thumb
trigger to stop recording.
Notes: If the tally light is turned on, it
starts flashing. About five seconds before
recording begins, the tally light will start
flashing faster. It will stop flashing when
recording begins.
To stop self-timer recording before it has
started, press the thumb trigger again, and
set the Interval Timer to OFF.
12.Turn off the interval time when you are
finished by selecting Interval Time
OFF in the Sub Menu.
Tally
Interval Timer
Rec Time OFF
JLIP ID NO. 0 7
ON
OFF
6. Press
4 4 or 3 3 to highlight Interval
Timer.
Tally
Interval Timer
Rec Time OFF
JLIP ID NO. 0 7
ON
OFF
15S
30S
1min
5min
OFF
7. Press
6 6 to start Interval Timer
flashing.