Runco CL-610 - Manual (Page 19)

Controls and Functions
Runco CL-610 Series Owner’s Operating Manual 7
PRE
L
IMINAR
Y
6. RUNCO LOGO
The logo can be rotated to match the projector orientation: inverted (ceiling-mounted)
or upright. To rotate the logo, grip it at the sides, pull it away from the projector and
rotate it 180 degrees.
7. LAMP MODULE COVER
Remove this cover to access the lamp compartment.
8. FRONT/REAR ADJUSTERS
Use these to adjust the projector height or projection angle.
9. CEILING MOUNT HOLES
Use these to attach the ceiling bracket to the projector.
2.2
Lens Controls and
Status Indicators Figure 2-4 shows the CL-610 lens controls and status indicator LEDs. .
Figure 2-3. CL-610 Lens Controls and Status Indicators
1. FOCUS RING
Rotate the ring to focus the projected
image.
2. ZOOM RING
Rotate the ring to adjust the projected
image size.
Focus
Zoom out Zoom in