Runco LIGHTSTYLE LS-7 - Manual (Page 45)

Installation
Runco LS-7 Installation/Operation Manual 29
PRE
L
IMINAR
Y
3.9
Adjusting the Picture
Orientation If the LS-7 is installed behind the screen, you must change the picture orientation to
match the installation method. To do this, press MENU on the remote control. Then,
select System from the Main Menu.
Rear Projection If the projector is used in a rear-projection application (see Figure 3-6), press repeatedly
to select Rear Projection from the System Menu. Press or to set it to On.
Ceiling Mode If the projector is ceiling-mounted, the LS-7 automatically inverts the image. If this
automatic inversion is not desired, select Ceiling Mode from the System Menu and set it to
Off.