Runco VISTAGE V-50HD - Manual (Page 56)

Operation
42 Vistage™ Series Flat-Panel Display Installation/Operation Manual
PRE
L
IMINAR
Y
• Color Temp: Select Color Temp from the Display Color - Common Settings menu to
adjust the color temperature. Color temperature establishes the “color of gray” by
adjusting the 75% white point to various color points.
What are “color points?” A “color point” is an x/y coordinate pair that defines a
color’s location on the standard CIE chromaticity graph, shown in Figure 4-7. (CIE
stands for “Commission Internationale de l’Éclairage” (International Commission on
Illumination), the organization responsible for color measurement and management
standards.)
Figure 4-7. CIE 1931 Chromaticity Diagram
• Simple: Select Simple mode from the Color Temp menu to choose one of five color
temperature presets: 3200K, 5500K, 6500K, 7500K and 9300K. The default setting,
6500K, is appropriate for most situations. Higher settings produce a “bluer” picture;
lower ones impart a reddish hue to the image.
Table 4-2 lists the x- and y-coordinates for each color temperature preset in
“Simple” mode.
Table 4-2. Color Temperature Presets and Associated Color Points
Color Temperature Preset
Associated x/y Values
x y
3200K 0.423 0.404
5500K 0.332 0.348
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
x
y
2000 2222 2500 2857
3333
4000
5000
5714
6667
8000
10000
D50
D65
D93
Red
Blue
Green
Cyan
Magenta
Yellow