Roberts Radio STREAMTime User Manual

Page 60

Wireless Standby mode

Your clock radio has a wireless standby mode feature that allows you to
choose whether to stay connected to the wireless network when the clock
radio is in Standby.

This feature is enabled by default (or after a factory reset) and is intended
to minimise the time taken by the radio to start playing when it is switched
on.

1. Press

the

Back button to enter main mode menu.

2. Press

the

Tuning Up or Down buttons until 'Settings' shows on the

display then press the Select button to enter settings menu.

3. Press

the

Tuning Up or Down buttons until 'Network' shows on the

display then press the Select button.

4. Press

the

Tuning Up or Down buttons until 'Wireless Standby power

mode' shows on the display then press the Select button. The current
setting will ﬂ ash on the display.

5. Press the Tuning Up or Down buttons to select 'YES', then press the

Select button to conﬁ rm that you wish to stay connected. If you do
not wish to stay connected select 'NO'.

2-5