Roberts Radio STREAMTime - Manual (Page 54)

53
Auxiliary input socket
A 3.5mm Auxiliary Input socket located on the rear of your clock radio
is provided for connecting the audio signal from an external audio source
such as an MP3 or CD player.
1. Connect a stereo lead from the headphone output of your MP3 or
CD player to the Aux In socket. Typically this lead will have a 3.5mm
stereo plug at both ends.
2. Switch on your clock radio and turn the volume on the clock radio
to minimum.
3. Press the Band button on your clock radio until 'Auxiliary Input' shows
on the display.
4. Press 'play' on the connected audio device and adjust the volume using
its volume control, leaving the clock radio's volume at minimum.
5. After use, disconnect your player in order to listen to your clock radio
conventionally.
3