Roberts Radio STREAMTime - Manual (Page 57)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
56
Information
Entering the network name manually
If you need to enter the wifi network name manually into your radio (if the
SSID is not being broadcast by your router) then please use the following
procedure.
1. From the radios Settings menu, select ' Network' and then 'Enter
network name'.
2. To enter the SSID, characters are selected and entered using the
Tuning Up or Down buttons. As you press the buttons, the radio
scrolls through the available characters. The central character will
be entered when you press the Select button.
Do this as needed until the complete network name has been entered.
The SSID setting is sensitive to upper and lower case characters and
symbols. You must enter it exactly as set up in your router.
Press the 'Back' button to erase a character or key previously
entered
Select 'END' when the SSID is complete
Alternatively the 'END' symbol can be quickly accessed by pressing
the Add/RDS button.
Select 'Back' button to cancel and go back to the DNS settings
screen
3. The clock radio will then try to connect to the named network. The
remainder of the connection procedure should then be followed - see
page 10, step 11.
2 2
2
2