Roland HP-307 - Manual (Page 59)

61
Connecting to Other Devices
Here’s how you can completely erase all songs that were saved in
internal memory, USB memory (sold separately), or a floppy disk
(sold separately).
Once an initialization is performed, all songs that have been
saved in memory will be erased. The erased data cannot be
recovered, so we recommend that you check the contents of
memory before you proceed.
If you’re using new USB memory (sold separately) or floppy
disk (sold separately) with the HP307 for the first time, you’ll
need to initialize (format) the USB memory or a floppy disk
before using it. The HP307 can’t use USB memory or a floppy
disk that has not been initialized.
If you want to initialize USB memory or a floppy disk, make the
following preparations before you proceed.
• Connect your USB memory to the external memory connector.
• Connect your floppy disk drive to the external memory connector,
and insert a disk in the drive.
1. Enter Function mode, choose “File Menu,” and press the
[ ] button (p. 53).
2. Press the [ ▲ ] or [ ▼ ] button to choose “Format Media.”
fig.aaaa
3. Press the [ ] button.
If you decide not to execute Format Media, press
the [Song] (Tempo) button.
fig.aaaa
4. Press the [-] or [+] button to select the memory that you
want to initialize.
5. Press the [ ] button.
A confirmation message will appear.
fig.aaaa
If you press the [ ] button, you’ll return to the previous
screen without initializing.
6. Press the [ ] button.
Initialization will begin.
The entire contents of the selected memory will be erased.
In some cases, when USB memory is connected to the external
memory connector, it may take longer for data to be loaded, or data
may fail to be loaded successfully. If this occurs, you may be able to
solve the problem by changing the external memory setting
1. Enter Function mode, choose “Ext. Memory Mode,” and
press the [ ] button (p. 53).
2. Press the [-] or [+] button to edit the setting.
3. If you change this setting, turn on the power once again.
This setting is remembered even when the power is turned off.
Initializing the Memory (Format Media)
Display Description
Internal Memory Internal memory
External Memory USB memory
Disk Floppy disk
Changing the External Memory Setting
(Ext. Memory Mode)
Setting
Mode 1, Mode 2
Caution when Initializing the Memory
• Never turn off the power while “Executing...” is shown in the
display.
• If the screen indicates “Error,” please refer to “Error Messages”
(p. 74).
• Initializing the HP307’s internal memory will not initialize
settings other than the contents of internal memory. If you
want to return settings other than the contents of internal
memory to their factory-set condition, execute the Factory
Reset operation (p. 59).
• Don’t disconnect the USB memory until USB memory
initialization has been completed.
• While a floppy disk is being initialized, do not eject the disk
from the floppy disk drive or disconnect the cable of the disk
drive.
HP307_e1.book 61 ページ ２０１０年１月４日 月曜日 午後５時３９分