Roland HP-307 - Manual (Page 55)

57
Various Settings
You can set the metronome to play at even smaller intervals.
The metronome will sound when you enter the setting screen.
Some of the internal songs have a tempo that varies during the
song.
If desired, you can make these songs play at a fixed tempo.
If Tempo Mute is turned on, the tempo indication in the screen will
be highlighted.
fig.d-EQ-Param.eps
This setting specifies what the key transpose will affect.
You can use the key transpose to change the pitch of both the song
and the keyboard, the pitch of only the song, or the pitch of only the
keyboard.
You can change the pitch of the Tone 2 in Dual Play (p. 26) and
Lower tone in Split Play (p. 29) an octave at a time.
Altering the pitch in one-octave units in this way is called “Octave
Shift.”
For example, you can raise the pitch of the Lower Tone to the same
pitch of the Upper Tone in Split Play.
Metronome Setting
Changing How the Metronome Marks the
Beat (Metronome Pattern)
Setting Description
Normal usual sound
-
dotted half note
half note
dotted quarter note
quarter note
dotted eighth note
eighth note
sixteenth note
Double note added to back beat of every beat
Triplet added notes sound every beat as a triplet
Shuffle notes added to create a shuffle
Playing Back at a Fixed Tempo
(Tempo Mute)
Setting Description
On
Tempo changes recorded in the song will be ignored, and the
song will play at a fixed tempo.
Off
The song will play according to the tempo changes it
contains.
Performing Settings
Specifying What the Key Transpose will
Affect (Transpose Mode)
Setting Description
Keyboard
Keyboard notes
Transpose (p. 32)
Song
Song playback
Playback Transpose (p. 40)
Keyboard & Song Keyboard notes and song playback
Changing the Pitch of the Tone in Octave
Steps (Octave Shift)
Setting
-2–0–+2
HP307_e1.book 57 ページ ２０１０年１月４日 月曜日 午後５時３９分